Forging: 1.100 ~ 900 ℃
Annealing: heating to 800-850 ℃, stay at this temperature in two to four hours, allowed to cool gradually in the oven.
Quenching: first pre-heated to 550-600 ℃, once heated to 950 ℃, and then heated to a: 1,220 ~ 1250 ℃; b: 1,200 ℃ ~ 1230 ℃. Hardened in oil, but oil must be guaranteed

Wet 40-60 ℃ (a general tool;.. B toughness of the tool in the form of a complex formula needed)
Tempering: heating to 550-570 ℃, stays at this temperature and then cooled in still air, tempering must be repeated twice
Hardness: HRC63 ℃ or more.
Purpose: This is tungsten steel high speed steel, suitable for manufacturing powerful cutting wear and impact resistance of various tools, and advanced die, screw die, more complex tools required toughness and shape, cutter, drill

And so on.
Dimensions:
3.2X32-40-50-65-80-105-130-155-205-255-305-380
4.5X32-40-50-65-80-105-130-155-205-255-305-380
6X32-40-50-65-80-105-130-155-205-255-305-380
8X32-40-50-65-80-105-130-155-205-255-305-380
10X32-40-50-65-80-105-130-155-205-255-305-380
13X32-40-50-65-80-105-130-155-205-255-305-380
16X32-40-50-65-80-105-130-155-205-255-305-380
19X32-40-50-65-80-105-130-155-205-255-305-380
22X32-40-50-65-80-105-130-155-205-255-305-380
26X32-40-50-65-80-105-130-155-205-255-305-380
32X32-40-50-65-80-105-130-155-205-255-305-380
38X32-40-50-65-80-105-130-155-205-255-305-380
45X32-40-50-65-80-105-130-155-205-255-305-380
50X32-40-50-65-80-105-130-155-205-255-305-380